A tree lover cannot stay even a moment, thinking without the wellbeing of the garden. All the tree inside of the garden is the most valuable things to every gardener. Therefore, they always eagerly try to properly clean their trees on a regular basis.
However, a pressure washer is one of the most fabulous accessories that need to clean the dirty garden fence or sidewalks. Nowadays, many gardeners use a pressure washer to spray on the trees.
So, what is a pressure washer? Why do you need to use it in your garden? How to use a pressure washer to spray trees? And lastly, is it safe for your trees? Let’s find out all the answers in one article-
What Is A Pressure Washer?
A pressure washer is a powerful (10 to 50 times stronger than regular garden hose pipe) water hose that can clean hard dirt, unwanted paint, mud, gum, or other substantial debris from the wall, vehicle, or other metal surfaces.
The mechanism of action of a pressure washer is, it sprays water at a potent speed (more than 1000 psi to 3000 psi or above) to remove the stubborn debris or unwanted things.
So, despite having several other techniques to remove those unwanted things, why you need to use a pressure washer?
A pressure washer can accomplish any hard cleaning job just at a glance! This device is featuring a faster and easier cleaning process for the user.
Why Do You Need To Use It In Your Garden?
I heard of using a pressure washer to clean the backyard, driveways, sidewalks, vehicles, any deck, bulky furniture, and even any wood or metal surface before painting.
Cleaning the fence or the path can be impressive with a pressure washer. So, I often heard many gardeners use pressure washers to clean the trees, spray water, and spray insecticides on the trees.
How To Use A Pressure Washer To Spray Trees
You have to know in detail about your pressure washer before you are going to spray on your trees. Never try to use a pressure washer with high psi for spray on the tree.
Both for home use or spraying on the tree, always choose the lowest psi pressure washer. Set the psi with the lowest possible psi. Set the spray nozzle such a way so that it sprays water in the broader approach.
Before spraying, check the water or insecticide’s speed rate and spray pattern anywhere else to stop further chance to damage the foliage.
What Do You Want To Spray On The Trees? (Is It Mandatory?)
People spray water, insecticides, or fungicides on the tree. Spraying chemicals sometimes doesn’t make any sense. The first problem is, this harmful chemical droplet may back on your body. So, there is a chance to damage your body if you could not take proper protective gear while spraying chemicals on the tree.
And the second issue is that the excessive chemicals may drain out on other little or nearby vegetation, which in further can get damaged. So, try not to use insecticides on the trees. Instead of it, you can initially use a little more massive water spray on the trees. Insects like Aphids, Whiteflies have a chance to washed down after a forceful water spray.
So, use plain water to remove those insects. But be careful, do not increase the psi so high, which could damage the foliage.
Is A Pressure Washer Safe For Your Trees?
Spraying water or insecticides with a high speed is capable enough to damage the top or other soft branches of the tree. You might know psi of pressure washer are various ranges, like 700 psi and up to 3,000 psi. By chance, if it turns to my usage, I will prefer to lowering the pressure range for spraying on over the trees.
Many well-reputed gardeners suggest not to use a power spray on the tree. The reason behind that is that power spray usage so high speed of spraying on the trees could damage the foliage.
Tips For Using A Pressure Washer
- Reduce the psi at the lowest value you can. It will ensure the safety of your foliage.
- Use a full spray nozzle. It will help to distribute the spray speed on a broader area. Thus, the spray speed will reduce effectively.
- Make sure your pressure washer is working correctly. A problematic device may cause a severe incident on your body.
- Try to spray holding the nozzle tip from an angle to the tree. It will help to reduce the spray speed.
- When you intend to store the machine in winter, store it with a Pump Preservative. Your device will stay safe against further corrosion or freezing related to cold weather.
Frequently Asked Questions (FAQs)
Do I need any safety gear before I use a pressure washer?
It depends on the spray type and spray agents on the trees. Spraying water at a lower psi doesn’t make any sense to wear safety gear. However, if you are going to spray insecticides, you need to use safety gloves, eye protectors to protect your body from going in close contact with the chemical’s droplets.
Can I use a power washer to spray any trees?
No, you can’t. You can use a pressure spray for spraying over a maximum of 20 feet taller trees. Spraying on the soft trees could also kill or damage them. Therefore, don’t use a pressure washer to spray on the weak or extremely gentle trees.
Which type of pressure washer I supposed to use to spray on the trees?
Is there any scope to use an electronic switchboard near your garden? If so, you can go for an electric pressure washer. Electric pressure spray generally contains near about 1200 to 1800 psi, which you need to lower as you can.
Never forget to move your spray nozzle during spraying on the tree vigorously. It will help to prevent a direct strike on the trees. Ultimately it will stop tree damage.
So, this is all about how to use a pressure washer to spray trees. If you think this info is beneficial to you, please share it on your timeline.